Welcome To E.R.M.

We offer a mobile service at your home or place of work for most of the obd procedures of re mapping and most boot mode work which means the removal of the ecu from the car-van-motorhome etc etc. But in some cases this can't not be done on site as the process is to in depth. In these instances we will remove the ecu from the vehicle and take it to our work shop lab to carry out the process then return with it back to the vehicle fully remapped and carefully reinstall it. The whole process of arriving, removal and reinstall normally takes no more than two hours... dependent on distance from our work shop in Manchester and the traffic congestion etc..but you don't pay for the time, you just pay for the fixed price job.

We only use the top quality and latest equipment to carry out any of our work procedure as well as the very best up rated files which are rolling road live tested before release to ensure their safety and optimal performance for both torque and bhp as well as optimizing fuel economy.

All our files are stringently rolling road dyno tested to be safely within the capabilities of its performance of the engine being remapped, as every file is wrote individually for each engine we install our software on. Also every remap carries a guarantee of quality and within the limits of the the engine ecu that its installed on. We reserve the right to advise of warnings on very high miles, worn engines or warn turbos on both diesel and petrol engines, as the added power and torque could shorten the operational life of a very worn part..but we would advise of our professional opinion of condition on our arrival and inspection and observations...

PLEASE BE AWARE WE ARE FULLY TRAINED MECHANICS WITH OVER 40 YEARS EXPERIENCE AND HAVE PRIDE IN OUR HONESTY, INTEGRITY AND MUCH PRIDE IN OUR WORK AND WILL NOT SELL OR INSTALL SOMETHING THAT MAY CAUSE HARM TO A WORN OR DAMAGED ENGINE.

WE HAVE THE LATEST EQUIPMENT TO CARRY OUT EVEN THE LATEST ANTI -TUNE BOSCH TRICORE ECU’S SO JUST RING AND ASK.

We can remove DPF and EGR valve software, remove speed limiters and any other software limiters that are stock or been retro installed.  

We mobile operate within a 30 miles radius of central Manchester but further by agreement.

We carry out a full diagnostic check previous to all remaps - DPF or EGR VALVE software removal.

We operate mobile work 9am 8pm 5 days a week as a rule but weekend work is also welcome on request.

Performance Remaps normally achieve increased gains ranging between 21% to 37% more power and bottom end pulling power torque and the fuel savings can be as high as 20% dependent on driving style..but the tech rule is the more power a engine has the less hard work it has to do to get up to the required cruising speed. EMAIL US YOUR CAR- VAN- MOTOR HOME- ENGINE DETAILS AND WE WILL MAIL BACK THE GAINES ACHIEVED BY OUR REMAP...we will not retain your address or spam you to death from then on, just one reply to you and then its down to you if its a job you want us to do for you or not.

 

 

AREAS WE COVER:

   

RING US ON:

 

EMAIL US:

hello@ecumapmanchester.co.uk

 

               
 
 
 
 
 
 
 
   

©2014 - All Rights Reserved - www.ecumapmanchester.co.uk - Website Design By DWD